VAPEを嗜み日々是好日

私、ベイパーのダヴが個人運営していますVAPEブログです。MOD、アトマイザーに於いてはマスプロからハイエンドまで、そして様々なリキッド、その他VAPE用品について記事を書いています。ようこそ楽しくて美味しいVAPEの世界へ。

SXK Armor 2.0 Styled RDA(アーマー2.0のクローン)使ってみました

Hello, everyone in the Vapor! It was a fist of the first time in about a month! How are you? Aside from that I think that I will try to play with him today. Huh? Is this? Well ... in short it is cloned.
(やあ、ベイパーのみんな!およそひと月ぶりのごぶさただったな!元気だったかい?それはさておき今日はこいつをいじってみようと思うんだ。え?これか?まあ…要するにクローンさ。)

SXK Armor 2.0 Styled RDA(アーマー2.0のクローン)

Fortunately I have genuine armor 1.0! Great! I gave it to Mr. Marin, who is also a friend of the vapor and a blogger, I think I will try to compare it to its armor 1.0!
(幸いなことにおれはarmor1.0の本物持ってんだぜ!すげ〜だろ?こいつはベイパー仲間でもありブロガー仲間でもあるミスターまりんに譲って貰ったんだ、そのarmor1.0と見た目を比較してみようと思うんだ!)

Although it is a clone, it should resemble the real thing ... I do not recommend the clone itself, but I can check the structure and appearance beforehand in the sense of preliminary training. In that sense, there is a great deal of cloning beforehand while learning until you get it.
(クローンとはいえ、本物そっくりに似せてあるはずだ…クローン自体をお勧めはおれはしないが構造や見た目を予め予習という意味では調べることができるよな。そういった意味じゃ、手に入るまで手こずっている間クローンでどんなもんか予習しておくっていうのもありっちゃあありだよな。)

It is not my hobby to squat down lecture ... Tentatively ... That's right ... Why do not you look at the clone of armor 2.0 all the time and see how it differs from the real one in 1.0 ...
(ぐちゃぐちゃ講釈垂れ流すのはおれの趣味じゃねえ…とりあえず…そうだな…armor2.0のクローンを一通り見てから1.0の本物とどう違うのか見ていくことにしようか…)

What is attached to this cheap plastic case together ...
(このチープなプラスチックケースに一緒に付属されているものは…)

• Reducers for single coils
• Positive pins for BF
• O-rings
• Imo screw
(•シングルコイル用のレデューサー
•BF用のポジピン
•Oリング
•イモネジ…あ、あと写真取り忘れちゃったけどサイズ違いの六角ピン二本だ)


OK, let's compare it with the real 1.0 from here
(よし、ここから本物の1.0と見比べていくことにしよう!)

2.0 on the right and 1.0 on the left
(右が2.0、左が1.0だ)

2.0 juice well depth is 5 mm ... 1.0 is about 4 mm so it seems to be 1 mm deep. Oh, 2.0 has a foundation with a height of about 1 mm at the base of the post, I wonder if this makes a depth of 1 mm.
(2.0のジュースウェルの深さは5ミリ…1.0は約4ミリだったから1ミリ深くなっている様だ。あ、2.0はポスト根元に約1ミリの高さの土台ができているな、これによって深さを1ミリ稼いでるのかな。)

2.0 is also an atomizer with an outer diameter of 22 mm as in 1.0, but ... Looking at the deck seems to be smaller than 1.0 .... Look it up.
(2.0も1.0同様外径22ミリのキャップのアトマイザーなんだが…デッキを見てみると…1.0より小さくなっているみたいだ…。見てくれ。)

1.0

2.0

But ... the diameter in the deck looks the same ...
(でも…デッキ内の径は同じの様だ…)

2.0

1.0

I do not really understand what the difference in this neighborhood means! I will go on next!
(この辺の違いがどういう意味があるかはよくわからん!次行くぜ!)

OK, let's look at the 2.0 clone alone from here. Let's decompose it for a while.
(よし、ここからは2.0のクローン単体でみていくことにしよう。ちょっとバラしてみよう。)

Air hole is here. There are three places lost in the slit, look, here.
(エアホールはここ。スリットに紛れて三ヶ所あるぜ、ほら。)


That's why we are dealing with singles as well
(これでシングルにも対応してるってわけだな)

Deck back
(デッキ裏面)

It looks like the deck and cap have cutouts so that they can turn the cap by that much ... Uh ... I do not understand why! To change the position of the coil! Maybe!
(デッキとキャップにそれぞれ切り欠きがあってその分だけキャップを回せる様になっているみたいだ…えーと…なぜかはよくわからん!コイルとエアーフローの位置を変えるためだ!多分!)


Well, let's organize it soon!
(よっしゃ!いっちょ吸ってみるか!)

Yup! It is normal! It is delicious normally! If you do this, you can use it normally without hesitation! Waah ... ... ... but ... well you had better have the real ones ... well, okay! See you! ! !
(うん!普通だ!普通に美味しいな!これなら普段気兼ねなく使えるわ!あとは…よくわからん!わははは…!はは…でも…所詮クローンだからな…やっぱ本物持ってる方がいいよな…まあ、いいか!またな!!!)

にほんブログ村 健康ブログ 電子たばこへ
にほんブログ村